Flash Furniture X10 High-Back LeatherSoft Racing Style Gaming Chair with Flip-Up Arms, Ergonomic Padded Swivel Computer Chair, Black

I bought the grey version as a present for my brothers birthday and really liked the comfort and quality for the price. I noticed the lower back support right away. I was due for a new chair and bought the black version for myself a couple months later. I’m 5’10 and 205 lbs. The cushion is soft and firm. The height is just right with out using the leveler handle to raise it at all. The arm handles raise up and down which is nice when I’m not using the chair to push it all the way into my desk.I started by mounting the bracket to the bottom of the seat. Then I screwed the arm handles to the back part of the seat first. After that I installed the bottom seat to the handles. Lastly I put the wheels one the base and covers/caps to the arm handles following the cylinder. Don’t forget the cylinder caps before you mount it to the chair. I did the first time around and had to hammer the base out with a towel to avoid damage to uninstall. Easy to assemble & took about 20/30minutes each time. Includes a hex key tool for the screws.Some people mention having a hard time aligning the screws with the holes but I just pressed down firmly when lined up and had no issues for both chairs. Each screw went in all the way to make contact then I tightened all of them when everything was aligned correctly. If you tighten each one right away, it can be uneven or slightly off when assembled.Price at this time is $131.83 and I bought it for $114.69 with a 20% coupon that was offered on the page. Definitely a deal if you can get it under $100

This chair is worth every penny! Having back issues and being comfortable is important and this chair exceeded my expectations. If you have back issues I highly recommend this chair. Not one complaint about this chair.

I bought this as a gift for my 15 yo. He said the instructions were a bit different but he was able to assemble himself. We did return because he decided he rather have one that reclines and has a foot rest. The quality was overall pretty good.

We followed the instructions that were written by "wtrandom" in his review. It gave us confidence as the instructions were just pictures and no words. We pushed down hard to do the armrests as others also suggested. So, the assembly went well. It's definitely best to do it with 2 people, but it's possible with 1 person, but requires some ability to do so. End result was the chair is absolutely good looking, comfortable, and sturdy. We bought the camouflage one as at the time it was the least costly so it was a bargain. 2 thumbs up!!!

Like the fact the arms fold up.

Bought this thinking it would be a good chair for VR, I was wrong.It was a bit difficult to put together, the fabric around the screw holes for mounting the arms was improperly cut and blocked the screws themselves from being able to get in properly without an extra set of hands to move things around. Also the arms on mine are slightly out of alignment, the right arm sits lower than the left.Update after a few days of use:The arms are uncomfortable, they are either too small or sit too high up for me and can cause slight elbow pain and like others have said the fabric is a bit scratchy. The knob to adjust the reclining feature is difficult to use and seems to do absolutely nothing. Also the chair tends to creak and pop when I move around as if all the screws aren't tight, even when they're as tight as I could get them.Update 2, 20 days of use:The arms are still as annoying as ever and constantly getting in the way when gaming. The screws did indeed come loose which was causing the popping but seem to be okay after tightening them down a second time. The only way the tension knob works is if you tilt the chair over onto the floor, otherwise it won't rotate at all.The worst thing of all is since the first day of using this chair it interferes with the blood circulation in my legs. It causes my feet to swell after a few hours of sitting down, which can get really bad and even painful after all day use. After some reading up I've found out this applies to all ergonomic chairs and can only be fixed by tilting the front of the seat downward, which this chair and others in the price range simply cannot do. If returning furniture weren't so hard to do from my location I'd have this out my door in a heartbeat.

I’m glad I have it, it’s very comfy and sturdy while also rolling very easy BUT I wouldn’t buy it again just based in the assembly process. I’m not new to the rodeo of building furniture. I’d dare say call myself an expert at this point, but attaching the seat cushion to the back of this chair via the arms?! Quite possibly the most humbling experience I’ve had in recent years. I had to call in help and even with two of us man handling this thing I was ready to give up and throw it out. We did it, but we both were in pain the next day as if we had been in a wrestling match.

This is a nice looking and comfortable chair. It is well made and has plenty of adjustments. Had it since Christmas 2023. Long term quality is tbd

Its definitely not the higher end finishing but I received what I expected and paid for. So for $120 chair I give it a 4 star. Shipping was fast as well. All good.

Not the best one. Within 2-3 days of installing, some screws came out. Parts are not measured properly. That’s why the installation becomes messy and hard.

Songmics has a similar one which is cheaper and far better.

Ein toller Bürostuhl mit viel Sitzkomfort. Der Sitz ist wirklich sehr weich und angenehm. Der Stoff glänzt fast so stark wie auf dem Foto abgebildet. Ein toller Stuhl. Eindeutige Kaufempfehlung.

This is a good chair, perfect for what I was looking for, I wanted it for VR gaming and its perfect for that, the back isn't too high for me at 6ft, I can freely turn my head without the headset rubbing on the back... the one I received seems well made, it was a bit of a challenge putting it together, the screws were a bit tricky until I got used to it.